Recommended Sites

Calendar

July 2017
M T W T F S S
« Jun    
 12
3456789
10111213141516
17181920212223
24252627282930
31  

Posts Tagged ‘Decals’

Lindberg Model kits: Big 1/16 Scale Serpent Sho-Go Rod!

posted by ChrisP 9:00 AM
Friday, April 14, 2017

After 47 years and some tooling work the Serpent Sho-Go Rod is ready to roll again! The kit has had quite a few variations over its long history. The first appearance was in Pyro’s 1965 catalog as the TeeNT Sho-Go Street Rod and the Gee-T Custom Show Car.  The Serpent variation first appeared in 1966 as the Cobra Tee Way-Out Rod.

In 1970 skis where added to the Gee-T and it was re-christened as the Sno-Skeeter, the Cobra Tee became the Serpent, and new parts were tooled for the 4th version – the Laramie Stage Ghost.  In 1979 Lindberg released the TeeNT as the Bull Horn Street Rod. Supposedly, it was renamed as such because, when loonies at Lindberg obtained the tooling, they thought that the horns from the Laramie were meant to go with the TeeNT.

The Serpent is a big, fantastic rod at 1/16 scale. It sits at over 8 inches long and 5 1/2 inches tall. The kit features snakeskin textured side panels & upholstery, detailed engine, rubber whitewall tires and slicks, an extra cobra throne seat, antique cowl lamps, custom bucket seats with cobra headrests, seat belts, custom exhaust pipes and twin steering controls.  Parts will come injected in blue, black and clear.  Alterations to the kit include improving the way the bucket sits on the frame and adjusting the stance of the 3rd seat to better match the box art.

For those wanting a more custom look the Serpent comes with a slew of bonus parts including front & Rear fenders, chrome wheel covers, chrome gas tank, alternate cowl lamps, and chrome air cleaners.  An all new feature for the Serpent is a large, snake-themed decal sheet. Slithering your way this May!

 

 

Save

Lindberg Model kits: 5 Space Ship of The Future! Back from the Past

posted by ChrisP 6:23 PM
Thursday, March 9, 2017

Blasting from the past is Lindberg’s 5 Space Ships of the Future.  Considered to be Lindberg’s most iconic and sought after kit, the futuristic 5-pack will finally be available for the first time since its originally release way back in 1958.  Along with 5 complete model kits, the release will features vintage boxart, retro-inspired decals, and a few new twists.  The 5 decal sheets are remastered from the 1958 versions but with a better fit and details, and include all new decal options inspired by the kits rich histories. Also for the first time ever parts are injected in a spaceship grey.

The all new full color tray features amazing models painted, assembled and photographed by E. James Small.  Check out more of his work at smallartworks.ca.

Star Trek Model Kits: U.S.S. Enterprise D & Aztec Decals sneak peek

posted by ChrisP 5:25 PM
Thursday, September 22, 2016

amt955-and-mka019

Here is a preview of 2 upcoming Star Trek releases, the AMT955 1:1400 U.S.S. Enterprise NCC-1701-D kit and the Aztec decal set for that kit.  They will be sold separately.

The U.S.S. Enterprise NCC-1701-D model kit will be coming out first.  This all-plastic model kit is 18 inches long when fully assembled, and features a removable saucer section and dome base with metal support rod.  This special edition is molded in clear plastic, which allows the modeler the option of lighting the kit.  (Light kit not included.)  Also included are standard marking, pennant, registry, and lifeboat decals; and complete instructions.

amt955-pkg

amt955-06-ent1701-d-decals

The 1:1400 U.S.S. Enterprise NCC-1701-D Aztec decals will be released shortly after the base kit.  The set will include 4 – 9.25 x 13.25 inch decal sheets and placement instructions.  If you pick up the Enterprise D kit make sure you don’t miss out and keep you eyes out for the Aztec decals!

mka019-12-enterprise-d-aztec-decals-pkg

mka019-buildup

mka019-12-enterprise-d-aztec-decals-page01 mka019-12-enterprise-d-aztec-decals-page02 mka019-12-enterprise-d-aztec-decals-page03 mka019-12-enterprise-d-aztec-decals-page04

 

Lindberg Table Top Navy: HMS King George V and HMS Dorsetshire

posted by ChrisP 5:14 PM
Thursday, February 18, 2016

First, for those of you I haven’t met my name is Chris Purvis.  Last year I manned the booth at Wonderfest with Jamie.  I work primarily on the Lindberg/Hawk line doing the military and historical kits (airplanes, naval boats, sailing ships, tanks, etc.).  The occasional car or oddball kit will also end up on my desk.  Before switching over to Lindberg in 2014, I worked on the Forever Fun line.  Next month I will be celebrating 3 years with Round2.  Also, I am a big nerd for movies and vintage sci fi, so if you want to get off topic in your comments go that direction. -ChrisP

Available soon will be the 3rd 2-pack in the Lindberg Table Top Navy Series, the HMS King George V & the HMS Dorsetshire.  The kit features two World War II British Battleships in 1:1200 scale.  Like the previous ships in the series, they can be displayed as Full Hull or Waterline models.

HL439-12-TTN-2-Pack-HMS-King-George-V-&-HMS-Dorsetshire-packaging--o-1

Recently we’ve been able to acquire some of the original box art paintings used on old Pyro and Lindberg kits.  The King George V box art is from a new scan of the 1959 painting. It is amazing to see some of the original detail and brush work put into these pieces of art.

Pyro-KingGeorgeV-painting_500

For the Dorsetshire I scanned the 1959 packaging.  From my research I could not find any references to the ship ever have the depicted camouflage pattern.  I altered the image to show this known hull scheme.

Before….

dorsetshire-then

1941-HMS_Dorsetshire_500

After…

dorsetshire-now

The kit will include that hull scheme for the HMS Dorsetshire as a decal, along with a dazzle camo option for the HMS King George V.

HL439-12-TTN-2-Pack-HMS-King-George-V-&-HMS-Dorsetshire-decals

 

Round 2 Model Kits: DO… YOU… WANT… TO…PLAY… A… GAME…?

posted by JamieH 1:25 PM
Tuesday, September 13, 2011

This may not turn into “Global Thermal Nuclear War” (well at least I hope it doesn’t), but I always like to post about things I’m kind of jazzed about when I’m working on Round 2 model kits. Usually when there is a lull in posts, it is because I’m busy working on a package or instruction sheet. Both are major time hogs but generally aren’t much to talk about. So when inspiration hits, I always try to write something out real quick.

Anyways, I’ve been working on some decals this week that have been pretty fun. Rather than come right out with it, I figured I’d make a game out of it. (Michael, our new creative director LOVES games. I hope he is proud of me.) So, the pic shows what I’ve been up to. I’ll give you twenty guesses as to what it is. Whoever correctly guesses first is the winner. I’ll send the winner a proof of the decal sheet when it arrives.

UPDATE: OUR WINNER… CHIANGKAISHECKY

I knew it wouldn’t take long but I figured I would have to drop at least one hint. We are bringing the U.S.S. Enterprise NCC-1701-C back out by the end of the year and it will feature a nice size decal sheet featuring ALL NEW battle damage decals based on the original filming model.  When I first started figuring out how much I would be able to include, I discovered that the ship was pockmarked with relatively small spots of damage. Once I had a map established, I discovered that if I concentrated on the hull opening itself but not include the black burn marks, I would be able to include every spot I could detect in the reference I had on hand. I figured most modelers could handle the little bit of freehand airbrushing that would be needed to complete the look. Even without the additional airbrushing, they look pretty good on their own. I’m showing one of the decals below along with the reference shot and how it will look with a little airbrushing.

Besides revised Enterprise-C registry markings, U.S.S. Yamaguchi registries will also be included. Unfortunately, it doesn’t look like I will have room on the sheet for the U.S.S. Excalibur registries. The sheet size is determined by the bottom of the box and it looks like it will be pretty well packed. We will have a product page up our website soon.

css.php