Comments on: Star Trek Model Kits: Boldly Going… Again! http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/ Wed, 08 Jul 2009 15:02:06 +0000 hourly 1 https://wordpress.org/?v=6.4.3 By: BobP http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/#comment-221 Wed, 08 Jul 2009 13:03:06 +0000 http://www.collectormodel.com/?p=152#comment-221 Glad you like the tattoos; those were used as incentives to get folks to fill out our survey at WonderFest. We still have a few of those left, though, so I’ll make an offer β€” send me a self-addressed, stamped envelope and I’ll see that you get one of each. Here’s the mailing address:

Bob Plant
Round 2 LLC
4073 Meghan Beeler Court
South Bend, IN 46628

I’ve got several dozen left from WonderFest; so if anyone else is interested as well, I’ll be glad to fulfill requests, as long as I’m provided with the all-important SASE (self-addressed, stamped envelope). We’ll be giving some of these away at iHobby in October as well.

Bob

]]>
By: wbbwarren http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/#comment-214 Mon, 06 Jul 2009 16:36:26 +0000 http://www.collectormodel.com/?p=152#comment-214 I don’t suppose these tattoos are available any more. I’d really like to get one if at all possible.

]]>
By: jockdeboer http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/#comment-172 Thu, 18 Jun 2009 02:05:05 +0000 http://www.collectormodel.com/?p=152#comment-172 I for one do not like to look of the new E and so will not build it, but I love the Kelvin. The bigger the better!

]]>
By: jamesironwolf http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/#comment-168 Tue, 16 Jun 2009 22:26:21 +0000 http://www.collectormodel.com/?p=152#comment-168 The windows and docking hatches do not look like they match for that size….but ok….1/2500 scale kit would be about 11.5 inches..hum.
your NCC-1701 kit is about that size built…. Yea i think a 1/2500 scale of that size would make everyone happy. It would go well with the old 3 piece kits, or go well sitting between your 1/1000 tos and refit Enterprises kits.
For those of us who don’t buy the triple sized version. Sad that they did the characters so well they messed up the biggest star of the film. The Enterprise herself. Keep up the great work over there. πŸ™‚ Can’t wait for the 1/1000 refit. guessing it will have markings for either 1701 or 1701-A? I have not seen my friend’s 1/350 refit kit yet.

]]>
By: BobP http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/#comment-167 Tue, 16 Jun 2009 01:00:37 +0000 http://www.collectormodel.com/?p=152#comment-167 Hi James,

My gosh, yes — JJ did make the ship that big. According to our (very reliable) source, the “actual” size of the ship is 2379.75 feet long. It’s a whopper. A 1/2500-scale kit would put the assembled model at about 11.5″ inches long, which is just right for standard size packaging.

I also would love a 1/1000-scale kit of the NuE, which would put the finished ship at about 28″ long. Unfortunately, a limited tooling budget will only go so far. HOWEVER, if the 1/2500 scale kit is successful, no doubt it helps to open the door for a larger kit down the road, maybe in time for the inevitable sequel?

As far as windows on the 1/1000 TOS Enterprise: we wanted to do windows (with clear inserts) on the 1:1000 Enterprise-A/Refit that is currently under development — the factory told us the size is too small to mold the kit with windows that small. So — I assume the same issue applied to the small TOS Enterprise when it was originally developed several years ago. However, I am sure that a resourceful modeler with a steady hand and a micro-drill could probably find a way to make “real” windows in the thing.

Bob

]]>
By: jamesironwolf http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/#comment-162 Mon, 15 Jun 2009 06:19:42 +0000 http://www.collectormodel.com/?p=152#comment-162 I was looking for a kit of the new movie Enterprise to be done too.
i was expecting it to be 1/1000 scale and about the same size of the NCC-1701-A
since it seem to use the same saucer and weapons design. I thought it was about like this picture i found. http://www.treksinscifi.com/trekdaily/?p=713
Seemed about right to me. But i heard it mentioned that the size opened your mind to a 1/2500 scale and i had to wonder if JJ made it worse than i thought.
I keep running into talk like this chart.
http://www.hobbytalk.com/bbs1/showthread.php?t=254526&highlight=ncc-1701+movie+scale
My god, really? Tell me JJ did not make her 700+ meters long.
The NCC-1701 should not be bigger than the NCC-1701-D in my opinion.
I do like the 1/1000 scale round 2 is doing. I was never a big fan of 1/2500 i feel it is to small for detail work like windows. Would love to see the movie enterprise kit about the same size as the enterprise A. (see 1st link)
I did like the new movie. It was great overall. But i do not really care for them make such large changes to a ship i grew up watching.
By the way i just got my 1/1000 tos NCC-1701 , great kit , love the options.
Only thing i would have like different… windows on the kit instead of on the decals. And maybe a optional open shuttle bay. But i here this is being done on the 1/350 scale. My friend already ordered his 1/350 A. Personally i
feel 1/350 scale is a bit big for my open model space. Don’t worry i will make room for a 1/1000 scale NCC-1701-D & E πŸ™‚ Think i got a bit off topic. sorry to make this so long.

]]>
By: eimb1999 http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/#comment-93 Sat, 16 May 2009 07:35:09 +0000 http://www.collectormodel.com/?p=152#comment-93 No Uranus jokes eh? well, do I have to bring up that old joke? Hey I bet some people haven’t heard it… What do Toilet Paper and the Starship Enterprise have in common? They both orbit Uranus and wipe out Klingons…

OOOOOHHH!!!!!

Yeah, it’s a groaner, and maybe a bit sick as well as childish, but, well, it’s relevant and a classic!

]]>
By: JamieH http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/#comment-85 Thu, 14 May 2009 13:17:30 +0000 http://www.collectormodel.com/?p=152#comment-85 Ha ha. You said “hole”.

]]>
By: BobP http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/#comment-84 Thu, 14 May 2009 13:04:42 +0000 http://www.collectormodel.com/?p=152#comment-84 We seem to be getting a lot of requests for that new Enterprise!

I think the tattoo is fun, too. The licensor is great about giving us flexibility to do things like this. There’s also another really cool tattoo that our web master, Andy, illustrated. I’ll post that image soon, probably after we get back from WonderFest.

Is that me muscling up there? Are you kidding? (I wish!) That tattoo will probably wrap twice around my little T-Rex arms. On the other hand, there’s plenty of room on my ample mid-section. Maybe I could apply it next to my belly button, and it will look like the Enterprise is being sucked into a big black hole. (No Uranus jokes, please.)

]]>
By: eimb1999 http://www.collectormodel.com/star-trek/152-boldly-going%e2%80%a6-again/#comment-82 Thu, 14 May 2009 07:15:20 +0000 http://www.collectormodel.com/?p=152#comment-82 The tattoo is very funny! “Mother ship”! Heh heh heh! Glad it’s not permanent though!

Hey Bob, is that you muscling up there? πŸ˜€

]]>